Thermal insulation coating

Stabiterm-350 liquid thermal insulation coating

Durable and lightweight elastic heat-reflecting coating for metal structures with high heat-insulating and energy-saving properties.

огнезащита, теплоизоляция

Stabiterm-350
liquid thermal insulation coating

Request for technical data sheet

For thermal insulation of metal structures of any complexity and configuration

Stabiterm-350 liquid thermal insulation coating

General information and application

Stabiterm-350 liquid thermal insulation coating is a one-component water-based heat insulation material for the protection of metal surfaces against external impacts and heat insulation. It is a composition based on acrylic polymers, hollow glass microspheres dispersed in this composition as well as functional additives. After drying, it forms a durable and light elastic heat-reflecting coating with high heat-insulating and energy-saving properties. Stabiterm-350 liquid thermal insulation coating (composition) is supplied in a ready-to-use form.

Liquid insulation

Stabiterm-350 liquid thermal insulation coating Efficiency.

Stabiterm-350 liquid thermal insulation coating is highly efficient for the following:

  • thermal insulation of metal structures of any complexity and configuration
  • hot and cold water pipelines
  • steam lines, air ducts for conditioning systems, and cooling systems
  • various containers, tanks, trailers, refrigerators
  • boiler, and capacitive equipment, etc. at operating temperatures from -60°C to +200°C.

In marine ships and floating structures, Stabiterm-350 coating may be used as thermal insulation in cargo spaces, mail and baggage rooms, refrigeration storehouse in service premises, as well as the primary deck covering and floor covering with a thickness of not more than 1.05 mm.

For PPP class ships, Stabiterm-350 composition can be used as thermal insulation of pipelines having a temperature of the outer surface of not more than 200°C, as well as cargo spaces, mail and baggage rooms, and refrigerated storerooms.

With its unique characteristics, Stabiterm-350 liquid thermal insulation coating is used for elimination of condensation on the cold water pipes and reduction of heat losses in the heating systems..

Moreover, one of the areas of Stabiterm-350 application is usage for the structural fire protection of metal structures.

World-class quality thermal insulation coating

Unique properties and advantages of Stabiterm-350

9
The service temperature of the coating is from -60°C to +260°C.
9
Reflects up to 85% of radiant energy and will not be destroyed by UV radiation.
9
Provides reliable surface protection against moisture, atmospheric precipitation, fluctuations of temperature, as well as salt solutions.
9
The guaranteed service life of the coating is 15 years if the application and service conditions are observed.
9
Prevents thermal deformation of metal structures.
9
Shows a good adhesion to metal, plastic, concrete, brick, and other building materials.
9
Heat insulation material that does not support combustion.
9
Efficiently reduces heat loss and increases corrosion protection.
9
Protects the surface from condensate formation.
9
Does not create an additional load on supporting structures

Technical information about Stabiterm-350

Certificates

The efficiency of the liquid thermal insulation coating is confirmed by the Certificate of Conformity. A Quality Certificate is issued for each lot, which confirms the main physical and chemical properties. Stabiterm-350 thermal insulation coating meets the requirements of the Russian Maritime Register of Shipping No. 17.51198.130 dated 23.05.2017. The safety of use is confirmed by the Certificate of State Registration No. KG.11.01.09.008.Е.003917.08.17 dated 07.08.2017.

Physical and chemical properties
Composition appearance White viscous liquid
Coating appearance After drying, a matt, even surface without pores and cracks is formed.
Mass fraction of non-volatile substances, not less than, % 57
Density, g/cm³ 0,52-0,65
Thermal conductivity, not more than, W/m·K 0,09
Coating thickness and consumption
Service temperature Composition consumption excluding loss (kg/m²) Dry layer thickness (mm)
from -60°С to +200°С 2,0 2.5
Characteristics
  • The thermal insulation coating is produced in a ready-to-use form
  • Color: white (can be tinted in pastel shades)
  • Diluent: water
  • Minimum application temperature: +5°С
  • Thermal conductivity, W/m·K: 0.09
  • Guaranteed shelf life in an original unopened package: 12 months
  • Packing: plastic bucket with a volume of 20 liters (weight: 9 kg)
Лаборатория огнезащиты дзержинск

Phone number

Price inquiry for STABITERM products

2 + 14 =

en_USEnglish