Stabiterm-217

Fire protection coating for indoor metal structures with a dry solids content of at least 70% and a warranty of up to 20 years. Used at more than 100 sites all over Russia and other countries.

Стабитерм 217 огнезащитная краска

Stabiterm-217
fire protection coating

огнезащита металлоконструкций стабитерм 217

Stabiterm-217 fire protection coating can be
supplied both in liquid and dry forms

Request for technical data sheet

For fire protection of indoor metal structures

General information and application of Stabiterm-217

Stabiterm-217 fire protection thermally expanding coating for metal structures is a complex multicomponent system comprising a suspension of intumescent fillers, various functional additives, and pigments in a water-dispersed film former. The action of the composition is based on the intumescence of the applied coating under the influence of high temperatures and the formation of a porous heat-insulating layer. Stabiterm-217 fire protection thermal expanding coating is produced in the form of a dry mix and a homogeneous suspension.

It is used for fire protection of metal structures in industrial and civil construction. It is used indoors or outdoors under shelter. For the application of Stabiterm-217 fire protection coating in the open air, it is necessary to use Stabiterm-007 protective weather-resistant paint. It complies with the fire safety requirements set out in GOST R 53095-2009.

World-class fire protection for metal structures

Unique properties and advantages of Stabiterm-217

9

Dry solids content is not less than 71%

The result is a low shrinkage of the coating. This significantly saves money, as less quantity of fire protection coating is required to achieve the layer of desired thickness. 

9

Reduces the labor costs

The capability to apply the coating with a layer of up to 1 mm in one pass significantly reduces the labor costs.
9

High dispersion ability

High dispersion ability means that no frequent replacement of airless sprayer nozzles is required.
9

Compatibility

The coating is compatible with different types of primers and finishing paints: Jotun, Hempel, GF-021, and others, which is achieved due to a high degree of adhesion of Stabiterm-217 to the surface.

9

Application in different conditions

Can be used both indoors and outdoors with special protective paints.

9

Savings on transportation

The compositions can be produced in the form of a dry mix, which provides savings on transportation costs of up to 50% and the possibility of transportation at sub-zero temperatures.
9

Service life is up to 25 years

The service life of the coating is not less than 20 years in the heated spaces, and 10 years in the open air, if the application and service conditions are observed.

Technical information

Certificates

Certification: fire resistance rating is confirmed by Certificate of Conformity S-RU.PB34.V.01165 dated 05.17.2013. The safety of use is confirmed by the Certificate of state registration RU.78.01.05.008. E.001029.06.13 dated 28.06.2013.

Fire resistance
rating
Fire resistance
rating
Effective
metal thickness (mm)
Consumption* (kg/m²) Dry layer thickness (mm)
15 min. 1 0,85 0,53
15 min. 3,4 0,25 0,15
30 min. 3,4 0,72 0,45
45 min. 1,5 2,51 1,57
45 min. 3,4 1,2 0,75
45 min. 7,8 0,53 0,33
60 min. 3,4 1,93 1,2
90 min. 4,1 3,04 1,9
90 min. 5,8 2,3 1,44
90 min. 8,9 1,76 1,1
120 min. 7,8 3,6 2,25

*Process loss is not included

Physical and chemical properties
Composition appearance White suspension or white powder
Coating appearance After drying, it forms a matte, even surface without pores and cracks
Dry solids content, not less than, % 71
Density, g/cm³ 1,2-1,3
Diluent Water
VOC No VOC
Characteristics
  • Used for fire protection treatment of metal structures.
  • The principle of action is based on the intumescence of the applied coating under the influence of high temperatures (from +200°C), and the formation of a porous heat-insulating layer.
  • Color is white (can be tinted to pastel shades).
  • Minimum application temperature: +5°C.
  • The guaranteed shelf life in an original package: 12 months.
  • Packing: 20 kg.
Reference list for Stabiterm-217
Sports complex, stlmt. Borovoe-Matyushino, Tatarstan, Russia
Sports complex, stlmt. Verkhniy Uslon, Tatarstan, Russia
Sports and recreation centre, Nizhny Tagil, Sverdlovsk region, Russia
Crystal Ice arena, Syzran, Samara region, Russia
Sports and recreation centre, Salavat, Bashkortostan, Russia
Ak Bure Sports complex, Kazan, Tatarstan, Russia
Factory sports and recreation centre, Saratov, Saratov region, Russia
Sports and recreation centre, Smolensk, Smolensk region, Russia
Chulichi Sports complex, Tatarstan, Russia
Sports and recreation centre, stlmt. Sharanga, Nizhny Novgorod region, Russia
Sports and recreation centre, Orsk, Orenburg region, Russia
Neftyanik Ice Palace, Ukhta, Komi, Russia
Sports and recreation centre, Sosnogorsk, Komi, Russia
Sports and recreation centre, Ukhta, Komi, Russia
Salavat Sports Complex, Salavat, Bashkortostan, Russia
Sports and recreation centre, Ekaterinburg, Sverdlovsk region, Russia
Universiada Sports complex, Kazan, Tatarstan, Russia
Ice Arena, Kostroma, Kostroma region, Russia
Ufa instrument-making plant named after V.I. Lenin, Ufa, Bashkortostan, Russia
JSC Mineral Fertilizer, Perm, Perm Krai, Russia
Bor Glass Plant (storage of finished products), Bor, Nizhny Novgorod region, Russia
Oleniy Ruchey MPP, Kirovsk, Leningrad region, Russia
Buckwheat processing plant with an elevator and a packing and logistics complex, Mtsensk district, Oryol region, Russia
JSC Sokol Nizhny Novgorod Aircraft Building Plant (Building 103), Nizhny Novgorod, Nizhny Novgorod region, Russia
Ferrero Russia, Vladimir region, Russia
ExpoCenter, Moscow, MR, Russia
JSC Radiopribor, St. Petersburg, Russia
Production facilities of the Mnogo Mebeli company, Saratov region, Russia
JSC Kazan Helicopter Plant, Kazan, Tatarstan, Russia
JSC Ammoni, Mendeleevsk, Tatarstan, Russia
Sverdlov State Owned Enterprise (Shop 4 (19/2)), Dzerzhinsk, Nizhny Novgorod region, Russia
Lakinsk brewery, Lakinsk, Vladimir region, Russia
Bor Glass Factory, Electrical substation, Bor, Nizhny Novgorod region, Russia
Pulp and Paper Mill, ILIM Group, Koryazhma, Arkhangelsk region, Russia
UNILIN, laminate production plant, Dzerzhinsk, Nizhny Novgorod region, Russia
Solar panel production plant, Novocheboksarsk, Chuvashia, Russia
JSC GAZ Automobile Plant Skoda assembly, Nizhny Novgorod, Nizhny Novgorod region, Russia
Yarpivo Baltica, Yaroslavl, Yaroslavl region, Russia
JSC PechoraNeft, Bugulma, Tatarstan, Russia
JSC MCC EuroChem, expanded polystyrene foam blocks production workshop, warehouses, Volgograd, Volgograd region, Russia
TyumenSpetsInzhenering LLC, Tyumen, Tyumen region, Russia
OJSC Mondi Timber Industry Complex, Syktyvkar, Komi, Russia
Avtomash LLC, trade and office building, Nizhny Novgorod, Nizhny Novgorod region, Russia
Poultry Farm Seymovskaya, Kulebaki, Nizhny Novgorod region, Russia
Masloproduct LLC, processing workshop, Voronezh, Voronezh region, Russia
OJSC Mondi Timber Industry Complex, Syktyvkar, Komi, Russia
Novoarzamassk Gas Compressor Station, Nizhny Novgorod region, Russia
LukOil, Uzbekistan
OJSC Zainsk Sugar, Tatarstan
Chelny-Broiler LLC, Naberezhnye Chelny, Tatarstan, Russia
Gorod SC, Saratov, Saratov region, Russia
Maxi SC, Smolensk, Smolensk region, Russia
Orange SC, Saratov, Saratov region, Russia
Trikotajniy Ray SC, Orsk, Orenburg region, Russia
Magnit Hypermarket, stlmt. Emanzhelinsk - stlmt.Esaulsky, Chelyabinsk region, Russia
PLAZA SC, Nizhny Novgorod, Nizhny Novgorod region, Russia
Magnit Hypermarket, Dzerzhinsk, Nizhny Novgorod region, Russia
Tura Market, Phase 3, Kazan, Tatarstan
Rio SEC, Nizhny Novgorod, Nizhny Novgorod region, Russia
Magnit Shopping Complex, Ekaterinburg, Sverdlovsk region, Russia
Logistic warehouse, stlmt. Levchenko, Tatarstan, Russia
SUMMIT Business Center, Yekaterinburg, Sverdlovsk region, Russia
MEGAMARKT SC, Ekaterinburg, Sverdlovsk region, Russia
Car showroom with service area, Krasnoyarsk, Krasnoyarsk Territory, Russia
Gudok shopping center, Samara, Samara region, Russia
Ryazan Airborne Command School, Ryazan, Ryazan region, Russia
Orsk State Drama Theater named after A.S. Pushkin, Orsk, Orenburg region, Russia
Ministry of Defense sites, Kostroma, Ivanovo, Kubinka, Russia
Zavelichye Military Town, Pskov, Pskov region, Russia
Brateevo Electrodepot, Moscow Metro, Solntsevo, Mitino, Moscow, overpasses
JSC Saravia Airport, Saratov, Saratov region, Russia
Koltsovo Airport, Ekaterinburg, Sverdlovsk region, Russia
Strigino International Airport, Russia
JSC Poultry Farm Severnaya, feed production plant, Siniavino, Leningrad region, Russia
Cattle complex, Bogorodsky district, Nizhny Novgorod region, Russia
Cattle complex, stlmt. Linda, Nizhny Novgorod region, Russia
Cattle farm, Kirov region, Russia
Application instructions

Surface preparation
The surface, on which the composition is applied, should be free from dust, dirt, and old coatings. Prior to application of Stabiterm-217 fire protection coating, the surface should be primed with GF-021 primer, or Stabiterm-022 phosphating primer, or their analogs. In the case of using phosphating primer, the presence of corroded areas with sufficient adhesion to the metal surface is allowed.

Application
Application of Stabiterm-217 fire protection composition on the metal surface may be performed using an airless sprayer, brush, and roller at an ambient temperature of not below +5°C and relative humidity of not more than 80%. Prior to application, the composition should be thoroughly mixed. During application, additional mixing is recommended to increase flowability. If necessary, it may be diluted with water to a working viscosity. The optimum thickness of the first layer is up to 500 µm. The thickness of the next layers may make up to 1000 µm. The coating is applied in 2-3 layers. Interlayer drying time is 3-6 hours at a temperature of +20°C. If the temperature decreases, drying time should be prolonged.

Safety precautions
All application works should be performed in accordance with the guidelines established by GOST 12.3.035-84 “Occupational safety standards system. Construction. Painting. Safety requirements”. The composition does not emit substances harmful to human health and does not irritate the skin. In case of composition's contact with skin, rinse the area of contact with warm water and soap.

Service life
The service life of the coating is not less than 25 years in the heated space if the application and service conditions are observed. The service life of the coating is not less than 20 years in the open air if the application and service conditions are observed.

Tool cleaning
We recommend rinsing the tools and equipment used for the application with water before drying the composition.

Storage and transportation
The guaranteed shelf life in unopened original packaging is 12 months. Storage conditions are from +5°C to +40°C. Transportation of Stabiterm-217 is allowed by all types of transport that ensure the safety of packages, in accordance with the rules for the carriage of goods in force for these types of transport.

All data specified in this document, except for the data confirmed by official certificates, are indicated for reference, based on laboratory tests and practical experience of use. The manufacturer shall not be responsible to the third parties for damage caused by improper or unauthorized use of the material.

 

Лаборатория огнезащиты дзержинск

Phone number

Price inquiry for STABITERM products

9 + 1 =

en_USEnglish